|
Post by Avionyx on Jul 18, 2010 8:36:47 GMT
|
|
|
Post by Algernon on Jul 18, 2010 8:48:07 GMT
Superb resources, sir! And sure, I'll have a look at those settings if I can figure it out, I suspect it's fairly self explanatory...
|
|
|
Post by Nemesis on Jul 18, 2010 9:16:52 GMT
Excellent work, indeed! You're a star and a scholar.
As for the flaps, I can tell you right away that in the model you have the option of 25, 75 and 100. Presumably these are percentages. I'll take her up now and see if the stated stall speeds correspond to these three settings.
|
|
|
Post by Nemesis on Jul 18, 2010 10:37:10 GMT
Ok, I've been up doing stall tests and this is what i have. These were all done starting at 3000ft and a weight of 2100 lbs.
Firstly, she will not stall straight and level at full idle. You have to put on an AoA of at least 10 degrees b4 she will bleed off speed sufficiently to reach a stall.
0 flaps = 54 kts stall - wings level will maintain fwd speed of 70kts 25 flaps = 54 kts stall - " " " " " " 70 kts 75 flaps = 52 kts stall - " " " " " " 65 kts 100 flaps = 50 kts stall - " " " " " " 62 kts
Each was tested 3 times
|
|
|
Post by Avionyx on Jul 18, 2010 10:42:30 GMT
hmmm.... looks like we need a bit of a FDM tweak to get it realistic but for now at least we have the checklists to follow.
Alex
|
|
|
Post by Nemesis on Jul 18, 2010 10:58:32 GMT
Yes indeedy! I've printed them all off so I have them in front of me until I can do em blindfold
|
|